Sweetheart Neck Design for Kurtis and Suits

12 necklines | Neckline shapes | Updated 7 October 2026

A sweetheart neck design has a small dip in the centre and two soft curves on the sides. It is a kurti and suit neckline, and the curves make the neck look longer.

Below you will find sweetheart necks plus close cousins: princess cut, heart, paan, matka, halter and keyhole shapes. Each picture has front and back depth, fabric, trim and a short tailor note.

Like simpler shapes? Visit our round and square neck and boat neck kurti design pages.

Sweetheart Neck Kurti Design and Sweetheart Neck Suit Design

A sweetheart neck dips in the centre and curves up on both sides like the top of a heart. On a kurti or suit it looks soft and festive.

Sweetheart neck kurti design in rani pink cotton silk with gold piping — **Depth:** Front 7 in, back 5 inFabric: Cotton silkTrim: Gold piping
Gold piping traces the two curves and the centre dip. A good festive pick for a round face.
**Darzi note**Centre dip 7 inches, side curves 5.5 inches. Line the front and pipe with soft gold.

Sweetheart neck suit design in bottle green chanderi with narrow zari lace — **Depth:** Front 7 in, back 6 inFabric: ChanderiTrim: Zari lace
Narrow zari lace on a sweetheart neck suit design looks rich but stays light. Wear it with a contrast dupatta.
**Darzi note**Keep the centre V point sharp. Hand sew 1 cm zari lace just inside the edge.

Sweet heart neck design on lilac cotton kurti with white cotton lace — **Depth:** Front 6.5 in, back 5 inFabric: CottonTrim: Cotton lace
Cotton lace makes the sweet heart neck design easy for daily wear. Suits young working women with a slim frame.
**Darzi note**Keep it modest at 6.5 inches. Attach cotton lace under the facing and topstitch.

Princess Cut Neck Design and Heart Shape Neck Design

A princess cut neck design is a sweetheart with straighter sides, set inside a fitted front. A heart shape neck design has rounder curves. Both look best on a well-fitted kurti. Compare them with our V neck kurti design ideas.

Princess cut neck design on wine silk kurti with princess seams — **Depth:** Front 7 in, back 6 inFabric: Silk, linedTrim: Self piping
The princess seams flow up into the neckline, so the fit is very clean. Suits a medium to large bust.
**Darzi note**Cut princess seams from shoulder. Shape the neck 7 inches with straight sides and a small dip.

Back heart shape neck design on mustard kurti with dori — **Depth:** Front 5 in, back 8 inFabric: Cotton silkTrim: Dori with latkans
A back heart shape neck design is a sweet surprise when you turn. The dori keeps the shoulders in place.
**Darzi note**Back heart shape 8 inches at the centre point. Add a dori at the top with latkans.

Ivory princess neck design with a row of tiny pearls along the edge — **Depth:** Front 7 in, back 5.5 inFabric: Georgette, linedTrim: Pearl edging
Tiny pearls along a princess neck design make it right for a reception. Hand wash only.
**Darzi note**Line fully. Hand stitch small pearls 1 cm apart along the neck edge.

Paan, Leaf and Matka Neck Design

A paan or pan neck design looks like a betel leaf, pointed at the bottom. A matka or pot neck design is round and full like a clay pot. They are popular on the back of a kurti. For more back shapes see our back neck design for suit page.

Teal kurti with paan shape neck design at the front and piping — **Depth:** Front 7 in, back 5 inFabric: RayonTrim: Contrast piping
The leaf neck design for kurti narrows to a soft point and lengthens the neck. Good for a round face.
**Darzi note**Paan shape, widest 7 inches across, point at 7 inches deep. Pipe in a contrast colour.

Back matka neck design on red kurti with a closed round top and buttons — **Depth:** Front 5 in, back 9 inFabric: Cotton silkTrim: Covered buttons
The back matka neck design has a narrow top and a round pot shape below. Covered buttons hold the narrow neck.
**Darzi note**Narrow top 3 inches, pot shape to 9 inches. Three covered buttons at the top band.

Matka neck design front on yellow suit with gota outline — **Depth:** Front 7 in, back 5 inFabric: CottonTrim: Gota patti
A front matka neck sits inside a yoke and looks lovely with gota. Wear it for haldi.
**Darzi note**Draw the pot shape on a yoke, 7 inches deep. Outline with 1 cm gota patti.

Halter Neck Design and Keyhole Neck Design

A halter neck suit design has a high neck at the front and cut-in shoulders. A keyhole neck kurti design adds a small opening below a closed neck. Both suit a long neck and slim shoulders. See band shapes on our collar neck kurti design page.

Stylish halter neck suit design in black cotton with mirror work — **Depth:** Front 2 in, back 6 inFabric: CottonTrim: Mirror work
The halter neck kurti design draws the eye up with a high neck and cut-in armholes. Mirror work adds a party touch.
**Darzi note**High halter neck 2 inches, cut-in armholes. Back 6 inches with a hook at the top.

Keyhole neck kurti design on sky blue cotton with a single fabric button — **Depth:** Front 2 in + 3 in slitFabric: CottonTrim: Fabric button
A small key hole neck design keeps a high round neck easy to pull on. Simple and smart for office.
**Darzi note**Round neck 2 inches with a 3 inch keyhole. Close with one fabric button and loop.

Emerald halter neck with a teardrop keyhole and zari piping — **Depth:** Front 2 in, keyhole 4 inFabric: Velvet, linedTrim: Zari piping
A teardrop keyhole on a halter neck looks dressy for evening functions. Velvet needs a cotton lining.
**Darzi note**Halter band 2 inches. Teardrop keyhole 4 inches long, piped in zari, lined in cotton.

Which Shape Suits You

Shape	Best for	Usual front depth
Sweetheart	Round face, medium bust	About 6 to 7.5 in
Princess cut	Fitted kurtis, larger bust	About 7 in
Paan or leaf	Round or square face	About 7 in
Matka	Back necks, festive suits	Back about 8 to 9 in
Halter or keyhole	Long neck, slim shoulders	About 2 in plus opening

Broad shoulders look softer with a sweetheart or paan neck. Avoid a halter if your shoulders are wide.

Stitching Tips for Curved Necks

Curved necks need care. Ask your tailor to:

Stay stitch the curve right after cutting.
Use a full front lining or a shaped facing, not a strip.
Clip the curve every 1 cm and snip right into the centre dip.
Add a small press stud inside the centre point if it gapes when you bend.

Piping, gota and cotton lace hold well in washes. Pearls and zari need hand washing. For more finishing ideas, read our neck design stitching guide.

Neckline questions

Is a sweetheart neck kurti design good for daily wear?

Yes, keep it about 6 to 6.5 inches deep and use cotton lace or piping. It is easy to wear under a dupatta. Go deeper and add zari only for functions.

What is the difference between a princess neck design and a sweetheart neck?

A sweetheart has round curves on both sides. A princess cut neck has straighter, angled sides and often joins princess seams. Both have a small centre dip.

What is a paan or leaf neck design?

It is shaped like a betel leaf, wide at the top and narrowing to a soft point. It makes the neck look longer. It works at the front or back of a kurti.

How do I stitch a back matka neck design?

Keep a narrow 3 inch band at the top with buttons or a hook. Below it, cut a round pot shape about 8 to 9 inches deep. Use a full facing so the curve stays smooth.